Using the 4 presets

TUNING ››
Parent Previous Next

QUICK INFO

The PBC-PRO has 4 memory presets for user settings. These allow the user to select between different boost control profiles.

Each of the 4 presets has its own setting values in menus 2, 3 and 4. This allows for great flexibility in setting up the boost profiles.

All other device settings which mostly concern vehicle setup and input/output setup are common between all presets.



SELECTING PRESETS 

There are two ways to switch between the four available presets.

  1. While looking any of the realtime screens press the "DOWN" button. The display will change to indicate the currently selected preset.  If you press the "DOWN" button again the next preset will be selected. Repeat pressing the "DOWN" button as many times as are needed to select the preset you want. Then wait for a few seconds and the display will revert back to the realtime view.
  2. Use menu 5.7 to setup external switches for selecting the presets. By using switches you can utilise 3 out of the 4 presets.



Hint:

You can choose the default preset that is used each time the PBC-PRO is turned on in menu 8.2.

Just place the selection on the preset you want to set as the startup preset and exit this screen.