2.9.3. Can Bus uSDM100,uSDM102
The uSDM100/102 includes an 240 ohm can bus terminating resistor installed on the circuit board. (If for a specific reason you need to remove this resistor please contact Plex Tuning).
SDM300,SDM500
The SDM300/500 includes an 120 ohm can bus terminating resistor installed on the circuit board.on CAN1 (If for a specific reason you need to remove this resistor please contact Plex Tuning).
The SDM500 includes an 1 Kohm can bus terminating resistor installed on the circuit board.on CAN2 (If for a specific reason you need to remove this resistor please contact Plex Tuning).
SDM700
The SDM700 has software enabled 120 ohm can bus terminating resistors on both CAN1 and CAN2. These can be enabled/disabled from the Plex Device Manager/Device Configuration/Receive Setup/Termination
|