DTA S Series

WIRING

S40 ecu:

SDM-500 pin 5 CAN1 HI yellow -------------> S40 pin 16 CAN H

SDM-500 pin 4 CAN1 LO blue -------------> S40 pin 17 CAN L

http://www.dtafast.co.uk/Downloads/Wiring_Diagrams/S40%20Wiring%20Diagram.pdf

S60 ecu:

SDM-500 pin 5 CAN1 HI yellow -------------> S60 pin 26 CAN H on plug with two key-ways

SDM-500 pin 4 CAN1 LO blue -------------> S60 pin 28 CAN L on plug with two key-ways

http://www.dtafast.co.uk/Downloads/Wiring_Diagrams/S60%20Wiring%20Diagram.pdf

S80 ecu:

SDM-500 pin 5 CAN1 HI yellow -------------> S80 pin 26 CAN H on plug with two key-ways

SDM-500 pin 4 CAN1 LO blue -------------> S80 pin 28 CAN L on plug with two key-ways

http://www.dtafast.co.uk/Downloads/Wiring_Diagrams/S80%20Wiring%20Diagram.pdf

S100 ecu:

SDM-500 pin 5 CAN1 HI yellow -------------> S100 pin 16 CAN H

SDM-500 pin 4 CAN1 LO blue -------------> S100 pin 17 CAN L

http://www.dtafast.co.uk/Downloads/Wiring_Diagrams/S100%20Wiring%20Diagram.pdf

ECU CONFIGURATION

Launch DTASwin PC Software
Ensure that the ecu uses at least firmware version V62.01, if not then follow DTA instructions to update the ecu firmware
Connect DTASwin to the ecu.
Navigate to the "Other Map Settings" menu and select "Data Stream"
Change your settings to match the image bellow:

6. Update ecu and close window.

7. Now you are ready to diplay and record data with your Plex SDM-500.

PLEX uSDM-SDM-VMU CONFIGURATION