Reading GPS and Accelerometer data - S6GP and S8

To receive the GPS and accelerometer data from the SDM-500 you need to:
1. Using SCal set the Datastreams / Custom Can / LR GPS / Receive LR GPS CAN Frames to YES or GPS-A10.
 
 
2. Using the Plex Device Manager/Device Configuration/Internal Channels table enable the following channels:
  • GPS La mm
  • GPS Lo mm
  • GPS Bearing x0.01d
  • GSpeed x0.01kn
  • Lat G
  • Long G
 
3. Create and add the following 3 can messages in CAN1/ Transmit Setup