WIRING
v44
SDM-500 pin 8 RS232 RX white -------------> Vipec Communications Connector pin 5 ECU RS232 TX
SDM-500 pin 9 RS233 TX orange -------------> Vipec Communications Connector pin 6 ECU RS232 RX
v88
SDM-500 pin 8 RS232 RX white -------------> Vipec Communications Connector pin 5 ECU RS232 TX
SDM-500 pin 9 RS233 TX orange -------------> Vipec Communications Connector pin 6 ECU RS232 RX
![]()
ECU CONFIGURATION
1. Check you ECU firmware version and update to 4.9.9 or higher.
2. Connect to the ECU.
3. Set Datastream Baud Rate to: 115200
4. Set Datastream mode to "Continuous - 25Hz
5. Store ECU settings by pressing "F4" on the keyboard.
6. Restart ECU.
![]() |