green low intensity = Data-logging active
red low intensity = Alarms active in background
red high intensity = Alarms active and displayed
purple low intensity = Flash memory erase in progress
Leftmost LED Green solid = Data-Logging active
Leftmost LED Orange Blinking = Flash memory erase in progress
Leftmost LED Orange solid = Flash memory full
Leftmost LED Red solid = Alarms active in background
Leftmost LED Green flashing and black screen = Firmware Update mode
Leftmost LED Red flashing and black screen = Corrupted Firmware - Program device again
All LEDS are fully configurable. Up to 2 different functions can be enabled to control each led besides the shift light functionality.
Power LED Red fast flashing = OK
Power LED Red ON or OFF = ERROR
GPS LED Green slow flashing = Seaching for GPS signal
GPS LED Green fast flashing = GPS Fix
GPS LED Green ON = GPS Differential fix
IMU LED Green fast flashing = OK
IMU LED Green ON or OFF = ERROR
LOGGING LED Green OFF = Logging OFF
LOGGING LED Green ON = Logging Active
LOGGING LED Green flashing = Memory Erase in progress
The 3 RGB leds have default functions as described bellow. If any of the custom led functions are enabled they will override the default.
Led 1: Bottom
Power OK: Red
Ethernet Connected: Blue 10Mbit, Green 100Mbit, Yellow 1000Mbit
Led 2: Middle
Trigger no signal - stopped - not synced: Black
Trigger synced :Green
Trigger errors :Orange flashing
Led 3: Top
Logging Off: Black
Logging Running: Green flashing
Streaming Data: Blue
Memory Full: Red
Memory Erasing: Red flashing
Memory Error : Yellow flashing
